Mishimoto Ölkühler Kit WRX STi 01-05 MMOC-WRX-01

Material 6061 Aluminum

Core Height 70.1 mm

Rows 10

Cooler Construction Stacked-plate

Note Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.

Core Thickness 50.03 mm

Core Length 279.4 mm

Fitting Size -10AN

Engine Codes EJ205 EJ255

Chassis Codes GD

Pressure Drop 1-2 psi

Install Torque Specs 15-25 ft/lbs (operating range) for all straight fittings and banjo bolts. Do not exceed the maximum torque rating of 35 ft/lbs.

Caution It is the installer’s responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact sales@mishimoto.com.

Increase In Oil Capacity .50 Quarts (0.473L)

Temp Difference 20+°F (16+°C)

Purchase Includes (2) – Application Specific Mounting Brackets

(1) – 10-Row Oil Cooler

(1) – 3′ Stainless Steel Braided Hose w/ -10AN Fittings

(1) – 4’4″ Stainless Steel Braided Hose w/ -10AN Fittings

(1) – Oil Sandwich Plate (Thermostatic Option Available)

(1) – Stainless Steel Sandwich Plate Adapter, M20

(2) – Banjo Fitting w/ Bolt M20 x -10AN, Black

(1) – Black Rubber Seal

(1) – Mounting Hardware Set

EJ205 EJ255 GD

2001-2005 Subaru WRX

2004-2005 Subaru STI